by ASC | May 9, 2020 | Solder Paste Inspection, 3D AOI, 3D SPI, Cyberoptics, Products
When you create PCBs, you will need to inspect the solder paste on the boards. It is important that the amount of solder paste used is accurate; otherwise, the PCB will be defective, and the electronics will not work properly. You can use an automated optical solder...
by ASC | May 5, 2020 | 3D SPI, Solder Paste Inspection
3D solder paste inspection, also called SPI is a technique for testing printed circuit boards to make sure that they are printed correctly. You use a machine to monitor the solder paste alignment and volume during the printing process. It is important that the volume...
by ASC | Apr 4, 2020 | Solder Paste Inspection
Solder paste inspections are important because they check the solder paste deposits that are made when the Printed Circuit Board (PCB) is manufactured. Most defects are a result of improper solder paste printing, so having an inspection will allow you to reduce the...
by Steve Arneson | Jan 31, 2020
LineMaster Fusion 3D LineMaster Fusion 3D provides high speed, inline sophisticated 3-dimensional solder paste measurement system coupled with an intuitive Windows® user interface. With only a few minutes of training, an operator can perform accurate 3D measurements...
by Steve Arneson | Apr 6, 2019
A 3D SPI System Is More Efficient The method of surface mount technology (SMT) has largely replaced the conventional construction method of using through-hole technology to mount components onto a printed circuit board (PCB) surface. With the introduction of SMT, a...
